50hz Minimum Combustible Dust Minimum Ignition Temperature Tester
Introduction:
This machine is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature of combustible dust cloud.
Standard:
EN 50281-2-1: Methods for determining the minimum ignition temperatures of dust.
Method B: Dust cloud in a furnace at a constant temperature.
ASTM E1491-06: Standard test method for minimum auto ignition temperature of dust clouds.
IEC 61241-2 replaced by ISO/IEC 80079-20-2:2016.
Electrical apparatus for use in the presence of combustible dust. Test methods: Methods for determining the minimum ignition temperatures of dust.
ISO/IEC 80079-20-2:2016 Explosive atmospheres. Material characteristics. Combustible dusts test methods
GB / T 16429 "minimum ignition temperature of a dust cloud testing methods"
Technical parameters:
1. The Test is carried on the in Godbert-Greenwald furnace.
2. The heating furnace is consisting of the vertical quartz tubes. The hole is at the bottom of the tube.
3. Furnace operating temperature range: room temperature ~ 800 ºC
4.The operating temperature can rise to 1000 ºC to clean the test chamber.
5. Temperature accuracy: ± 1% (higher than 500 ºC), ± 3% (lower than 300 ºC).
6. The pressure of the dispersion air chamber: 0 ~ 1 bar
7. The pressure accuracy of the air storage device: ± 5%
8. Size: 500X300X450 mm.
9. Power: 230v / 50Hz or 110v / 60Hz.
Safe use of dust explosion detector
1. Before cleaning the unit, unplug the power plug of the unit. Do not use liquid or spray cleaner, and use a wet cloth to clean the unit.
2. Follow the warning and instructions on the airframe.
3. Do not use the machine near water, such as near bathtub, washbasin, kitchen sink, etc.
4. Place the unit firmly in a stable place. If the unit falls, it may cause serious damage and/or personal injury.
5. Do not block the cracks and openings on the machine. They are used for ventilation to prevent overheating of the machine.
6. For safety, the machine is equipped with an earthing plug. If you do not have such a plug, please install one.
7. The machine can only use the power supply marked on the machine. If you do not know your power supply type, please consult the dealer or local power supply bureau.
8. Do not press anything on the power cord. Place the unit where the power cord will not be trampled or tripped.
9. Do not overload power outlets and extension cords, which may cause fire or electric shock.
10. Do not put anything into the machine from the gap of the shell, otherwise it may lead to fire or electric shock, do not throw any liquid on the machine.
11. To reduce the risk of electric shock, do not disassemble the unit. Opening or removing the cover may expose you to dangerous voltages or other hazards. Improper reassembly may result in electric shock in later use.
12. Unplug the unit from the power socket when the following conditions occur.
1) If any liquid is spilled into the machine.
2) When the power cable is damaged or worn.
3) If the unit has been subjected to rain or water.
4) If the machine falls or the fuselage is damaged.
5) If the machine cannot work normally when operating according to the operation manual, only the control part included in the operation manual can be adjusted. Incorrect adjustment will expand the fault of the instrument.
6) If the machine has significant performance changes.
| PRODUCT NAME | Flammability Testing Equipment |
| Certificate | CE |
| TEMPERATURE ACCURACY | ± 1% (higher Than 500), ± 3% (lower Than 300) |
| Test pressure of specimen | 1.0N±0.1N |
| FURNACE OPERATING TEMP RANGE | Room Temperature ~ 800 |
| SIZE | 500X300X450 mm |
| USAGE | Minimum Ignition Temperature Tester |
| POWER | 230V, 50HZ |
| PRESSURE OF THE DISPERSION AIR CHAMBER | 0 ~ 1 Bar |
FAQ
1. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
2.what can you buy from us?
Fire Testing Equipment,Environmental Test Chamber,Textile Testing Equipment,Toys Testing Equipment,Wire and Cable Test Machine
3. why should you buy from us not from other suppliers?
We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire
Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.
DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District (Dongguan City, Guangdong Province,China),a famous historical town with prosperous industry and convenient transportation.
We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc.
Decades of research and development strengthen the leading edge of YUYANG in this field, and established as an crucial role in R&D on high quality and high-cost performance of testing equipment. YUYANG's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, lithium battery, LED, photoelectricity, mobile, plastic and rubber, display, telecommunication, chemical industry, aerospace, building material and product, wire and cable, toys, furniture, textile and fabrix, etc. All YUYANG testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
DONGGUAN YUYANG INSTRUMENT CO.,LTD looks forward to cooperating with customer all over the world.
If you are interested in any of our products or would like to discuss a custom order. Please feel free to contact us. We are looking forward to forming succesful business with new clients around the world in the near future.
Certification
Customer Feedback
Product Tags:
|
|
50hz Combustible Dust Flammability Testing Machine For Minimum Ignition Temperature Images
|
